You will perform your best whenever you are in a comfortable space and a preferred position. Similarly, your air conditioner must be installed correctly for optimum performance. If it doesn’t fit the area well, it would need more maintenance. Therefore, whether you have an air conditioner at home or work, you must invest in air conditioning services to keep it functioning well.
When installing the air conditioner, check whether the commercial air conditioning installation in Sydney is installed according to the room’s location and configuration. The split AC’s indoor unit should be installed on a wall that’s strong enough to handle the unit’s weight. You must have proper spacing between the AC unit and the wall during home air conditioning installation in Sydney. There are at least 15 centimeters of open space surrounding the sides and tops for good airflow.
The AC unit must be installed from an appropriate height from the ground, around seven to eight feet, for adequate room cooling. While fixing the aluminum bracket on the wall during home air conditioning installation in Sydney, ensure the bracket is given a slightly tilted angle. The split AC’s indoor unit must be fitted at a slight angle to allow unrestricted flow of the condensed water from the drain pipe.
During commercial air conditioning service in Sydney, you must maintain the outdoor unit’s correct location. Mount the AC’s outdoor and indoor units away from water and direct sunlight and open space to allow the dissipated heat from the condenser to escape. When you hire a technician for air conditioning maintenance in Sydney, the outdoor unit must be appropriately placed on a study and flat surface. The surface contains the split AC’s integral components such as the fan motor, condenser and compressor. If the unit is laid out on an uneven surface, it causes excessive vibration and causes the coolant leakage and copper pipes to break and the condenser/compressor to damage.
During air conditioning maintenance in Sydney, technicians must maintain distance between the outdoor and indoor units. This is important for the coolant, as the low temperatures flow inside the copper tubes inside the split AC. Though some cooling loss is expected, one must maintain the maximum distance of fifteen meters.
If you’re looking for commercial air conditioning service in Sydney, contact us at Mojo Air.
0 Comments